Direct Fire Sealants

Dura-Fill direct fire sealants are suited for use in both direct fired and oil jacketed crack sealant equipment. They are specially formulated to tolerate direct fired heating method and the resulting hot spots that can occur. These materials are designed for use on driveways, parking lots, walkways and more. Dura-Fill direct fire sealants can withstand the unique stresses of slow-moving vehicles, foot traffic and shopping carts.

P&T Products | Dura-Fill HS

DURA-FILL® HS

Crack and Joint Sealant for Direct Fired Kettles

Direct Fire Oil Jacketed

Dura-Fill HS is a premium quality, direct fired material that is formulated to meet the demands of driveway and parking lot applications. HS contains less fillers than other sealants which means that it can fill more linear feet per pound than other products in this category, stretching the cost per pound further. The “HS” signifies that the material is “Heat Stabilized” for reliable results in direct fire heating.

View Product Download PDF
P&T Products | Dura-Fill HS2

DURA-FILL® HS2

Crack and Joint Sealant for Direct Fired Kettles

Direct Fire Oil Jacketed Dura-Melt

Dura-Fill HS2 is a specialty grade, economical, direct fired material. HS2 can withstand the unique challenges of driveways and parking lots such as power steering, foot traffic and shopping carts. This material has a high softening point and good low temperature flexibility making it a preferred material for most climates.

View Product Download PDF
P&T Products | Dura-Fill PL

DURA-FILL® PL

Parking Lot Crack and Joint Sealant

Direct Fire Oil Jacketed Dura-Melt

Dura-Fill PL is designed for use in oil jacketed and direct fired kettles equipped with a mechanical agitator system. PL is relatively hard and has a high softening point, which makes it well suited for parking lots and driveways. This material is lab tested to -10°F for flexibility, giving it the best low temperature performance of our parking lot sealants.

View Product Download PDF
P&T Products | Dura-Fill PL LP

DURA-FILL® PL LP

Parking Lot Crack and Joint Sealant

Direct Fire Oil Jacketed Dura-Melt

The LP in Dura-Fill PL LP stands for “low penetration.” This material has lower penetration levels in warmer climates than traditional parking lot sealants. Dura-Fill PL LP also has a lower initial surface tack, which means job sites can be opened to traffic or sealcoating application sooner than with other crack sealants.

View Product Download PDF
P&T Products | Dura-Fill DUO

DURA-FILL® DUO

Parking Lot & Roadway Crack and Joint Sealant

Direct Fire Oil Jacketed Dura-Melt

Dura-Fill DUO is the ideal product for the applicator who wants a single product to use in both road and parking lot applications. DUO meets ASTM D 6690 Type 1 requirements for roadways, yet it has a lower penetration level and higher softening point than traditional ASTM materials. This makes DUO a reliable choice for both types of applications.

View Product Download PDF